A Grant water damage inspection isn't a walk-through with a flashlight. It's a systematic, instrument-driven assessment that produces a written report showing exactly where the water went, how saturated each affected assembly is, and what needs to happen next.
Here's what makes our Grant inspection service more than a visual walk-through.
Thermal imaging is non-destructive and covers large surface areas quickly — making it the most efficient way to map water migration in a Grant property.
Thermal imaging shows probable moisture — calibrated moisture meters confirm it. Our Grant inspectors use both pin-type meters (direct reading in framing and structural members) and non-penetrating radio-frequency meters (surface reading through drywall and flooring) to take quantified moisture content readings at all thermal-identified locations. These readings are recorded at labeled sensor points and become the data basis for the written inspection report.
Every COS Water Damage Restoration Grant water damage inspection produces a written report: affected area descriptions, thermal images with annotations, moisture meter readings at labeled sensor points, water category determination (Cat 1/2/3), and a recommended scope of work with priority sequencing. Reports are formatted to be useful to your insurance carrier, a remediation contractor, or a real estate transaction where water damage disclosure is at issue.
Our Grant inspection service covers two distinct use cases that require slightly different approaches: pre-remediation inspection (mapping an active or recent water event for claim documentation and remediation scoping) and pre-purchase or post-remediation verification inspection (confirming whether previous water damage was properly remediated or whether current conditions indicate an ongoing or previous water problem). Both use the same instrument suite and produce the same written report format, but the findings are interpreted differently for each use case.
COS Water Damage Restoration's Grant inspection team covers every structural assembly type, every common water migration path, and every inspection use case encountered in residential and commercial water damage situations in FL.
When a water damage event has just occurred in a Grant property — or happened within the last several days — our inspection maps the full extent of saturation while the moisture is still detectable by thermal imaging and direct meter readings. This inspection is the foundation of the remediation scope and the insurance claim documentation. Without it, remediation crews are guessing at what to dry, and insurance carriers are estimating on incomplete data. Our Grant active event inspection captures the full saturation picture at the moment of peak detectable moisture — when the readings tell the most accurate story of what happened.
Real estate transactions in Grant frequently involve properties with prior water events — disclosed and undisclosed. Our pre-purchase inspection uses thermal imaging and moisture meters to identify active moisture in structural assemblies, staining patterns consistent with prior water intrusion, and the condition of previous remediation. For Grant buyers, this inspection provides either confidence that a disclosed water event was properly handled, or documentation that it was not — giving the buyer negotiating leverage and a clear picture of what additional remediation cost, if any, is warranted.
Post-remediation verification is an independent assessment — not a rubber stamp.
Mold risk assessment in Grant is distinct from air quality testing. We assess structural conditions and visible evidence — not air samples.
Below-grade moisture in Grant properties is underdetected and underlies a significant portion of structural issues discovered later.
Our Grant inspection reports are formatted to the documentation standards that insurance carriers use to evaluate water damage claims in FL.


Same-day scheduling available for active water events. Pre-purchase inspections booked on your transaction timeline.
Our Grant inspector arrives with FLIR thermal camera, calibrated pin-type and non-penetrating moisture meters, and inspection documentation tools. The inspection begins with a thermal pass of all suspected affected areas, followed by direct meter readings at all thermally identified locations. Each reading is recorded at a labeled sensor point location on the floor plan.
After the on-site assessment, your Grant inspector reviews the key findings with you — which areas are affected, what the readings indicate, what water category applies, and what remediation is indicated. If you have questions about specific readings or want to understand what a particular finding means, this is the conversation for it. The verbal review happens on-site.
Report delivered in the format your use case requires, within 48 hours of inspection.



"The thermal imaging session was what sold me on how a proper Grant water damage inspection should work. Our inspector traced water migration I never could have guessed at — the event in the utility room had spread moisture into the adjacent storage room wall framing more than twelve feet away. The written report documented all of it and our remediation contractor used it directly to scope the drying project."
"We used the COS Water Damage Restoration Grant inspection report to file a homeowner's claim for a water damage event. The adjuster reviewed the thermal image documentation and sensor point readings and approved the full remediation scope on first submission. The inspection report paid for itself many times over by eliminating the supplement process."
"The post-remediation verification inspection is what I most value. After our last Grant property water event, the remediation contractor signed off on completion. We had COS Water Damage Restoration do a verification inspection and found one wall section with framing still above 15% moisture content. That section would have been a mold problem within weeks. The verification inspection caught it before it became our problem."
COS Water Damage Restoration's certified inspection team serves Grant and surrounding communities throughout FL. Call +1-844-499-0972 to schedule your Grant inspection.
Visible water damage is easy to find. The moisture behind your walls and under your floors is what causes the mold problem three months later. Call +1-844-499-0972 and our Grant inspection team brings the instruments to find all of it.
📞 Call +1-844-499-0972 — Schedule Grant InspectionIICRC Certified · FLIR Thermal Imaging · Written Reports · Grant, FL